Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 10MM X 12MM - 25 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 1/8" X 3/16"- 50 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
USA Scientific Inc TipOne 200 uL yellow bev
TipOne 200 uL yellow, beveled pipet tips in racks, 80 racks of 96 tips (7680 tips)
MSC Quantum Storage Dividable Grid Container, Polypropylene, Clear, 10-7/8 x 8-1/4 x 3-1/2 in.
This polypropylene dividable grid container offers a clear and efficient solution for organizing and storing small to medium-sized parts. Its heavy-duty construction and transparent design facilitate quick content identification and access, making it ideal for various storage, kitting, and distribution applications.
- Grid dividers are gray
- Dividers allow customization of the container's interior
- Offers a safe storage method for various industries
- Heavy-duty construction
- Clear design
- Stacking capability
- Nesting capability
- Covers are available
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured Silicone, 1/8"" ID x 3/16"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications. Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -60 to 460¿F (-51 to 238¿C) Sterilize: Autoclave or gamma irradiation.
Cole-Parmer Food, Milk, and Dairy Tubing, 3/8" ID x 5/8" OD; 50 Ft
Food, Milk, and Dairy Tubing is non-toxic, taste-free and odor-free, and meets all applicable regulatory standards for use in food, dairy and milk applications. Producers of food, milk and dairy products require the dependable performance of this tubing in countless filling, draining, transfer and processing applications. Smooth, non-porous and flexible, the Food, Milk, and Dairy tubing promotes a sanitary fluid path by maintaining an interior free of trapped particles, and minimizing potential for bacterial growth. In addition, it is resistant to harsh alkaline cleaners and is not affected by most commonly used sanitizers.
Cole-Parmer Thermoplastic (SEBS) Tubing, 3/8" ID x 5/8" OD; 50 Ft
Designed for the most demanding biopharmaceutical applications, the thermoplastic SEBS (styrene-ethylene-butylene-styrene) tubing exhibits superior gas barrier properties and excellent pressure performance. Use the tubing in peristaltic pumps, single-use assemblies, process filling, and sampling devices.
Thermoplastic (SEBS) tubing does not contain BPA, phthalates, PVC, or peroxides that can leach out into the fluid, making it ideal for pharmaceutical applications, buffer and media preparation, and cell media processing. For an added level of particle control, a liner is placed between the tubing package and the box.
Bellco Glass, Inc. Silicone Tubing 25', 5/32OD Packs of 25'
Silicone Tubing 5/32". Silicone Tubing is specifically formulated for use with media found in pharmaceutical and biotech processing. Ideal for a range of performance requirements, extended life pumping and in applications demanding ultimate purity in fluid transfer and peristaltic pump. Peroxide silcone tubingod: 5/32" (4.0Mm)id: 3/32" (1.6Mm)wall: 1/32" (0.8Mm) max.Pressure @ 70°c: 14packed 25' rollapolypropylenelication: pharmaceutical, biotechnology, food & beverage aerospace & general lab apolypropylenelications. Characteristics: peroxide-curred - excellent heat resistance, lowcompression set, odorless, non-toxic - translucentresin cerfication: resin is fda-compliant (21 cfr 177.2600)Meets usp class vi requirements. Tubing is manufactured to gmp temperature range: -60°f to 460°f (-51°c to 238°c)sterilize: with autoclave or gamma irradiation. Size:5/32” x 25' .
Thomas Scientific Industrial Polyurethane Medium Bench Height Chair with Black
Industrial Polyurethane Medium Bench Height Chair with Black
McMaster-Carr Firm Polyethylene Tubing for Drinking Water
Firm Polyethylene Tubing for Drinking Water Semi-Clear White, 1/4" ID, 3/8" OD
MCMASTER CARR SUPPLY COMPANY TEFLON FILM 12 X 120IN .005THK
NC2337824 TEFLON FILM 12 X 120IN .005THK
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 1/8"" ID x 1/4"" OD; 300 ft
Reduce unpacking time, save money on shipping and ensure that you always have enough tubing on hand with bulk tubing. Platinum-cured silicone spools are sold in 300 ft or 500 ft spools.
McMaster-Carr Hard Nylon Plastic Tubing for Air and Water
Hard Nylon Plastic Tubing for Air and WaterOpaque Black, 3/32" ID, 1/8" OD
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 3-Stop, Tygon LMT-55, 3.17 mm ID; 12/PK
The overall length of LMT-55 97619-series stop tubing is 16" (406 mm). The legacy Ismatec stop tubing was 400 mm long.
Order extension tubing under "Accessories". For technical assistance selecting tubing formulations and sizes, contact our Application Specialists.